Position :
Home » Products » Amber Solar Stud Lights For Motorway 100-1
Product List
Road Stud Light, High Quality Road Stud Products from China Road Stud Light Suppliers & Manufacturers.

Amber Solar Stud Lights For Motorway 100-1

Body Material: ABS
Size: 100*100*18mm  (3.94″*3.94″*0.71″)
Filling: Epoxy+Quartz sand
Lens Material: PMMA

Product Introduction

Solar Stud Lights Features:

 

•Solar Stud Lights water, oil, chemical, and heat resistance.

•Solar Stud Lights can work more than 3 years normally.

•Very high reflectivity.

•Solar Stud Lights easy installation with glues.

•Photometric values:exceeds 600(mcd/lux).

 

Solar Stud Lights For Motorway color

 

Reflective Road Stud Parameters:

 

    Body material:      ABS
    Filling:     Epoxy+Quartz Sand
    Lens Material:     PMMA
    Reflector type:     Double side/Single side
    Quality:     ASTM D4280 & EN1463-1 standard
    Size:     100*100*18mm  (3.94″*3.94″*0.71″)
    Packing:     56*22.5*22.2cm,100pcs/ctn  (22.05″*8.86″*8.74″,100pcs/ctn)
    Weight:     180g/pc; 19kg/ctn  (0.4bs/pc; 41.89bs/ctn)

 

Amber Solar Stud Lights For Motorway
Amber Solar Stud Lights For Motorway

 

Installation Method Of  Solar Stud Lights:

1. Determine the installation location and distance, clean the road surface, and ensure that the Solar Stud Lights are installed on a flat road surface.
2. Clean the bottom of the Solar Stud Lights and apply the epoxy glue evenly to the back of the studs.
3. Press the side with the glue on the road, fix the position, wait for the glue to dry.
4. Check within 2 hours of installation to ensure that all Solar Stud Lights are not installed incorrectly and are not bent or deformed due to compression.
5. Remove the installation isolation facility within 6-8 hours after the installation of the Solar Stud Lights.

Send us a message
Name*
E-mail*
Phone
Country
Message
Copyright © Henan Ruichen Traffic Equipment Co., LTD All Rights Reserved